Electrolux ERE39350W User Manual download pdf (Page 72)

72

electrolux

INSTALLATION

Location

The appliance should be installed well

away from sources of heat such as

radiators, boilers, direct sunlight etc.

Ensure that air can circulate freely

around the back of the cabinet. To

ensure best performance, if the

appliance is positioned below an

overhanging wall unit, the minimum

distance between the top of the

cabinet and the wall unit must be at

least 100 mm . Ideally, however, the

appliance should not be positioned

below overhanging wall units. Accurate

levelling is ensured by one or more

adjustable feet at the base of the

cabinet.

Attention

It must be possible to disconnect the

appliance from the mains power

supply; the plug must therefore be

easily accessible after installation.

Electrical connection

Before plugging in, ensure that the

voltage and frequency shown on the

serial number plate correspond to your

domestic power supply. Voltage can

vary by ±6% of the rated voltage.

For operation with different voltages, a

suitably sized auto-transformer must

be used.

The aappliance mmust bbe eearthed.

The power supply cable plug is provided

with a contact for this purpose.

If the domestic power supply socket is

not earthed, connect the appliance to

a separate earth in compliance with

current regulations, consulting a

specialist technician.

The MManufacturer ddeclines aall

responsibility iif tthe aabove ssafety

precautions aare nnot oobserved.

This appliance complies with

the following E.E.C. Directives:

•

87/308 EEEC

of 2/6/87 relative to

radio interference suppression.

•

73/23 EEEC

of 19.2.73 (Low Voltage

Directive) and subsequent

modifications;

•

89/336 EEEC

of 3.5.89

(Electromagnetic Compatibility

Directive) and subsequent

modifications.

100 mm10 mm

10 mm

NP00

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 78 79 80

Comments to this Manuals

No comments