Electrolux IK257Z20RE User Manual Page 28

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 27
28
Interior LED light
The interior light switches off
automatically after the door
has been opened for approx.
15 minutes.
If the interior light does not
switch on when the door is
opened briefly, but the tempera-
ture display is working, the light
may be defective.
Attention!
To prevent injury or damage,
always ask our customer
service department to carry
out any repairs and replace
the LED interior light.
Caution - class 1M laser radia-
tion. When cover is removed,
do not look directly at light
through optical instruments.
Additional functions
In set-up mode you can set the child-proof lock, adjust the bright-
ness of the display and set the temperature in the NaturaFresh
compartment slightly lower or higher.
Activating set-up mode:
Press the
button 4 for approx. 5 seconds.
- The
button flashes.
- The display shows c for child-proof lock.
Note: The value to be altered flashes.
Select the required function by pressing the Up/Down button:
c = child-proof lock,
h = display brightness or
b = NaturaFresh temperature.
Now select/acknowledge the function by pressing the
button
briefly:
> For c = child-proof lock,
press the Up/Down button to select
c1 = child-proof lock on or
c0 = child-proof lock off and acknowledge with the
button. When the symbol is lit, the child-proof
lock is activated.
> For h = brightness,
press the Up/Down button to select
h1 = minimum to
h5 = maximum brightness and acknowledge with
the
button.
> For b = NaturaFresh temperature,
press the Up/Down button to select from
b1 = lowest to
b9 = highest setting and acknowledge with the
button. The altered NaturaFresh temperature adjusts
slowly to the new value.
Note: b5 = factory setting. By decreasing the temperature, b4
to b1, minus temperatures can be reached and the food in the
NaturaFresh compartment will freeze slightly.
Exiting set-up mode:
Exit the set-up mode by pressing the On/Off button
3; after
2 min. the electronic system switches over automatically. The
normal operating mode is activated again.
Repositioning the door racks
- Lift door rack vertically, lift out to
the front and re-insert at a dierent
height, following these steps in the
reverse order.
Equipment
You can re-arrange the storage
shelves as required.
Lift the glass shelf, align the recess
over the support and replace the shelf
in a higher or lower position.
Page view 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments