Electrolux ST29112 User Manual download pdf (Page 60)

Problem Possible cause Solution

The product temperature

is too high.

Let the product tempera-

ture decrease to room tem-

perature before storage.

The room temperature is

too high.

Decrease the room temper-

ature.

Water flows on the

rear plate of the re-

frigerator.

During the automatic de-

frosting process, frost de-

frosts on the rear plate.

This is correct.

Water flows into the

refrigerator.

The water outlet is clog-

ged.

Clean the water outlet.

Products prevent that wa-

ter flows into the water

collector.

Make sure that products do

not touch the rear plate.

Water flows on the

ground.

The melting water outlet

does not flow in the evap-

orative tray above the

compressor.

Attach the melting water

outlet to the evaporative

tray.

The temperature in

the appliance is too

low/high.

The temperature regulator

is not set correctly.

Set a higher/lower tempera-

ture.

The temperature in

the refrigerator is

too high.

There is no cold air circu-

lation in the appliance.

Make sure that there is cold

air circulation in the appli-

ance.

The temperature in

the freezer is too

high.

Products are too near to

each other.

Store products so that

there is cold air circulation.

There is too much

frost.

Food is not wrapped cor-

rectly.

Wrap the food correctly.

The door is not closed

correctly.

Refer to "Closing the door".

The temperature regulator

is not set correctly.

Set a higher temperature.

60

www.electrolux.com

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 66 67 68

Comments to this Manuals

No comments