Electrolux EBKGL7CN User Manual download pdf (Page 21)

• Clean the appliance interior after each

use. Fat accumulation or other food

remains may result in a fire.

• Clean stubborn dirt with a special oven

cleaner.

• Clean all accessories after each use

and let them dry. Use a soft cloth with

warm water and a cleaning agent.

• If you have nonstick accessories, do

not clean them using aggressive

agents, sharp-edged objects or a

dishwasher. It can cause damage to

the nonstick coating.

• Dry the oven when the cavity is wet

after usage.

11.2 Removing the shelf

supports

Before maintenance, make sure that the

appliance is cool. There is a risk of burns.

To clean the appliance, remove the shelf

supports.

1. Pull carefully the supports up and out

of the front catch.

2

3

1

2. Pull the front end of the shelf support

away from the side wall.

3. Pull the supports out of the rear catch.

Install the shelf supports in the opposite

sequence.

11.3 Steam Cleaning

Remove as much dirt as possible

manually.

Clean the inner door glass with a soft cloth

with warm water and a cleaning agent.

Remove the shelf support to clean the

side walls.

CAUTION!

For a better performance you

should start the cleaning

function when the appliance

is cool. Check the residual

heat.

Always use the function after cooking with

steam.

When the function is active, the lamp is

off.

1. Put 400 ml of water mixed with 3

tablespoons of vinegar (without herbs)

directly into the steam generator.

2. In the menu choose: Assisted

Cleaning.

3. Activate the function: Steam Cleaning.

The display shows the duration of the

function (33 minutes).

An acoustic signal sounds when the

programme is completed.

4. Touch a sensor field to deactivate the

signal.

5. Wipe the internal surface of the

appliance with a soft sponge.

6. Remove the remaining water from the

steam generator.

7. After cleaning keep the appliance door

open for approximately 1 hour. Wait

until the appliance is dry. To speed up

the drying you can heat up the

appliance with hot air at temperature

150 °C for approximately 15 minutes.

You can get maximum effects of the

cleaning function if you manually clean the

appliance immediately after the function

ends.

Use the function two times if the level of

dirt is high. Make sure that the appliance

is cool before you activate the second

cycle.

11.4 Decalcification of the

Steam generator

1. Put 250 ml of water mixed with 3

tablespoons of vinegar directly into the

steam generator.

2. In the menu choose: Assisted

Cleaning.

3. Activate the function: Decalcification.

The display shows the duration of the

function (15 minutes).

ENGLISH

21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Comments to this Manuals

No comments