Electrolux EWF12853 User Manual download pdf (Page 16)

If you turn the program selector knob

to another program when the machine

is working (except “Off” to switch off

the machine), symbol “ ” will flash

on display along with buzzer sound to

indicate a wrong selection. The

machine will not perform the new

selected program.

16 www.electrolux.com

Press the option touchpads, if you

want your laundry to be washed with

special functions.

Different functions can be

combined which is dependent

on the program selected.

If you want to adjust washing time,

press the “Time Manager ( )”

touchpad repeatedly to increase or

decrease washing time. See Time

Manager guide on page 12.

If you want to define the end of the

washing program, press the “Delay

End ( )” touchpad repeatedly to

choose your washing machine

working time.

To pause, press Start/ Pause. The

indicator will start flashing.

-

Press the Start/Pause again. The

program will continue.

-

Changing a running program is possible

only by resetting it.

Turn the program selector knob to the

position “Off” to cancel the program

and to turn off the appliance.

-

5.5 Interruption Of A Program

5.6 Changing A Program

It may be possible to change some of the

options after a wash program has started.

Turn the program selector knob to the

new program position and change any

available options. Press Start/Pause

to start the new program.

The appliance will not drain the

water (except programs; Spin,

Rinse + Spin, Vapour Refresh).

-

5.7 Changing The Options

Press the touchpad Start/Pause. The

indicator will start flashing.

1.

If available change the options that

you wish.

2.

Press Start/Pause again. The program

will continue.

3.

2.

If an option is not compatible

with the wash program

selected, symbol “ ” will

flash on display along with

buzzer sound.

-

-

The appliance will automatically

adjust the selected program duration

according to the type and size of the

load.

-

The display will show adjusted

program duration.

-

To start a program, press the Start/Pause

touchpad. The corresponding pilot light

will stop flashing and a default program

duration will be displayed on the screen.

5.4 Starting A Cycle ( )

After approx. 15 minutes from

the start of a program:

If you press any touchpad while a

program is operating, symbol “ ”

will flash on display along with buzzer

sound. (except Start/Pause touchpad)

-

-

While a program or the Delay End is

operating, the appliance door is locked

and the display shows the indicator “ ”.

First, set the machine to PAUSE by

pressing the “Start/Pause” touchpad. Wait

until the door lock indicator “ ” goes off,

then the door can be opened.

If the door lock indicator “ ” does not

disappear, this means that the machine

is already heating and the water level is

above the bottom edge of the door or the

drum is turning. In this case the door

CAN NOT be opened. If you need to

open it, you must drain the water to open

the door.

In case of emergency please

refer to “Emergency door

opening” on page 27.

5.8 Opening The Door

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 99 100

Comments to this Manuals

No comments