Electrolux EWP126300W User Manual

user manualWashing MachineEWP 106300 WEWP 126300 W

CONNECTIONS OVERVIEW115 cm 140 cm150 cm100 cmmax 100 cmmin. 60 cmmax 100 cm115 cm 90 cmmin. 60 cmELECTRICAL CONNECTION• The appliance must

PERSONALISATIONBUZZERThe appliance is provided with an acousticdevice, which sounds in the following ca-ses:• at the end of the cycle;• if there is a

Rust: oxalic acid dissolved in hot water or arust removing product used cold. Be carefulwith rust stains which are not recent sincethe cellulose struc

For the quantity of detergent, refer alwaysto what is written on the product packing.Use less detergent if:• you are washing a small load,• the laundr

• Remove the drawer. Push the draweredge outwards where indicated by thearrow (PUSH) to facilitate drawer remov-al.The flap is down and you wish to us

compartments of the dispenser drawer justbefore starting the wash programme.CLOSE THE DETERGENT DISPENSERDRAWERSET YOUR WASHING PROGRAMMEThe control p

• To switch the appliance off, turn the programme se-lector dial to the position .• To cancel or change a running programme, switchthe appliance o

5Display5.15.25.3The display shows the following information:5.1 Delay Start icon5.2 Child safety lockThis device permits you to leave the appliance u

Cancelling the Delay Start after having started the pro-gramme:• Set the appliance to PAUSE by pressing button 8.•Press button 6 once. On the disp

AT THE END OF THE PROGRAMMEThe appliance stops automatically. The pilotlight of the button 8 and the pilot light 7.3il-luminates. The display shows a

Electrolux. Thinking of you.Share more of our thinking at www.electrolux.comCONTENTSSafety information 2Frost precaution 4Environment concerns 4

Programme - Maximum and Minimum Temperature- Cycle Description - Maximum Spin Speed - Maxi-mum Fabrics Load - Type of LaundryOptionsDetergentCompart-m

Programme - Maximum and Minimum Temperature- Cycle Description - Maximum Spin Speed - Maxi-mum Fabrics Load - Type of LaundryOptionsDetergentCompart-m

Programme - Maximum and Minimum Temperature- Cycle Description - Maximum Spin Speed - Maxi-mum Fabrics Load - Type of LaundryOptionsDetergentCompart-m

• To aid cleaning, the top part of the addi-tive compartment should be removed.• Use a stiff brush to clean and remove allwashing powder residue.• Cle

• Open the filter cover by pressing the spe-cial hook and by rotating the cover up-wards.;Warning! Keep the filter cover openuntil the filter removal.

•The filter is inserted correctly whenthe indicator on its top is visible andblocked.• Close the filter cover.• Insert the mains plug again.CLEANING T

WHAT TO DO IF…The appliance does not start or stops dur-ing operation. Certain problems are due tolack of simple maintenance or oversights,which can b

Door openThe door has not been closed or is not closed properly.• Close firmly the door.The appliance does not start or stops dur-ing operation withou

Malfunction Possible cause / SolutionThe appliance vibratesnoisily:The transit bolts and packing have not been removed.• Check the correct installatio

electrolux 29

Centre. Always insist on genuine spareparts.INSTALLATION• This appliance is heavy. Care should betaken when moving it.• All packing and transit bolts

30 electrolux

electrolux 31

192988142-B-3642011 www.electrolux.com/shop

struction concerning use of the applianceby a person responsible for their safety.• Children should be supervised to ensurethat they do not play with

This means that they can be recycled bydisposing of them properly in appropriatecollection containers.ECOLOGICAL HINTSTo save water, energy and to hel

Spin Speed Maximum 1000 rpm (EWP 106300W)1200 rpm (EWP 126300W)1) Connect the water inlet hose to a water tap with a 3/4'' thread.INSTALLATI

• Remove the power supply cable and thedraining and inlet hose from the hoseholders (C) on the rear of the appliance.• Unscrew the three bolts (A) and

Accurate levelling prevents vibration, noiseand displacement of the appliance duringoperation.Repeat the levelling action, if the applianceis not leve

Push the drain hose onto the spigot andsecure with a clip, ensure a loop isformed in the drain hose to preventwaste from the sink entering the appli-a