Electrolux EWP126300W User Manual download pdf (Page 28)

Malfunction Possible cause / Solution

The appliance vibrates

noisily:

The transit bolts and packing have not been removed.

• Check the correct installation of the appliance.

The appliance is not levelled correctly.

• Adjust the feet.

The laundry is not evenly distributed in the drum.

• Redistribute the laundry.

Maybe there is very little laundry in the drum.

• Load more laundry.

Spinning starts late or

the appliance does not

spin:

The electronic unbalance detection device has cut in because the laun-

dry is not evenly distributed in the drum. The laundry is redistributed by

reverse rotation of the drum. This may happen several times before the

unbalance disappears and normal spinning can resume. If, after 10 mi-

nutes, the laundry is still not evenly distributed in the drum, the appli-

ance will not spin. In this case, redistribute the load manually and select

the spin programme.

• Load more laundry.

The load is too small.

• Add more items, redistribute the load manually and then select the

spinning programme.

No water is visible in

the drum:

Appliances based on modern technology operate very economically us-

ing very little water without affecting performance.

Unsatisfactory wash-

ing results

Too little detergent or unsuitable detergent has been used.

• Increase the detergent quantity or use another one.

Stubborn stains have not been treated prior to washing.

• Use commercial products to treat the stubborn stains.

The correct temperature was not selected.

• Check if you have selected the correct temperature.

Excessive laundry load.

• Reduce the laundry load.

The appliance makes

an unusual noise

The appliance is fitted with a type of motor which makes an unusual

noise compared with other traditional motors. This new motor ensures a

softer start and more even distribution of the laundry in the drum when

spinning, as well as increased stability of the appliance.

After completing these checks, switch on

the appliance and press the button 8 to re-

start the programme.

If the malfunction shows again, contact

your Service Centre.

The necessary data for the service centre is

on the rating plate. We recommend that

you write the data here:

Mod. ... ... ...

Prod. No. ... ... ...

Ser. No. ...

Model description

(MOD.)

...............................

Product number

(PNC)

...............................

Serial number

(S.N.)

...............................

28 electrolux

1 2 ... 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments

Electrolux EWP126300W User Manual Page 28

Comments to this Manuals

Related products and manuals for Washing machines Electrolux EWP126300W