Electrolux EWS106430W User Manual download pdf (Page 6)

Start Pause

This button allows you to start or to interrupt

the selected programme.

Time Manager

These buttons allows you to modify the pro-

gramme duration automatically proposed by

the appliance.

Door locked pilot light

The pilot light 9 illuminates when the pro-

gramme starts and indicates if the door can

be opened:

• light on: the door cannot be opened. The

machine in working or has stopped with

water left in the tub.

• light off: the door can be opened. The pro-

gramme is finished or the water has been

emptied out.

• light flashing: the door is opening

Display

7.4 7.5 7.1

7.27.3

The display shows the following information:

7.1:

• Duration of the selected programme

After selecting a programme, the duration

is displayed in hours and minutes (for ex-

ample 2.05 ). The duration is calculated

automatically on the basis of the maximum

recommended load for each type of fabric.

After the programme has started, the time

remaining is updated every minute.

• Delayed start

The Selected delay set by pressing the rel-

evant button appears on the display for

few seconds, then the duration of the se-

lected programme is displayed again.

• Alarm codes

In the event of operating problems, some

alarm codes can be displayed, for example

E20 (see paragraph «What to do if...»).

•

Incorrect option selection

If an option which is not compatible with

the set wash programme is selected, the

message Err is displayed at the bottom of

the display for a few seconds and the in-

tegrated red light of button 8 start flashing.

• End of programme

When the programme has finished three

flashing zeros are displayed, the pilot light

9 and the pilot light of button 8 go out and

the door can be opened.

7.2: Washing programme phase icons

•

Wash

•

Rinses

•

Drain

•

Spin

By selecting the wash programme, the

washing programme phase icons corre-

sponding to the various phases making up

the programme are shown in the bottom part

of the display. After having pressed button

8 only the icon of the running phase stays on.

6 electrolux

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Comments to this Manuals

No comments