Electrolux ESL6380RO User Manual download pdf (Page 10)

You must adjust the water soften-

er manually and electronically.

Manual adjustment

Turn the water hardness dial to the posi-

tion 1 or 2.

Electronic adjustment

1. Press the on/off button to activate the

appliance. Make sure that the appli-

ance is in setting mode, refer to “Set-

ting and starting a programme”.

2. Press and hold, at the same time,

Program and MyFavourite until the

indicators of Delay, Program and My-

Favourite start to flash.

3.

Press Delay.

• The indicators of Program and My-

Favourite go off.

• The indicator of Delay continues to

flash.

• The acoustic signals operate, e.g.

five intermittent acoustic signals =

level 5.

• The display shows the setting of the

water softener, e.g.

= level 5.

4. Press Delay again and again to

change the setting.

5. Press the on/off button to deactivate

the appliance and to confirm the set-

ting.

6.2 Filling the salt container

1.

Turn the cap counterclockwise and

open the salt container.

2.

Put 1 litre of water in the salt contain-

er (only for the first time).

3.

Fill the salt container with dishwasher

salt.

4.

Remove the salt around the opening

of the salt container.

5.

Turn the cap clockwise to close the

salt container.

CAUTION!

Water and salt can come out from

the salt container when you fill it.

Risk of corrosion. To prevent it,

after you fill the salt container,

start a programme.

10

www.electrolux.com

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 67 68

Comments to this Manuals

No comments