Electrolux 137018200 A Use and Care Guide download pdf (Page 16)

Installation Instructions

Water connection, con’t (Steam Model only)

WATER INLET ON DRYER

DIRECT CONNECTION

OR WITH EXTENSION

COLD WATER SUPPLY

HOSE TO WASHER

If your installation has room for the COLD 1.

watersupplytoacceptthe“Y”connector

directly,threadthe“Y”connectortotheCOLD

water supply and snug it by hand; then tighten

it another 2/3 turn with pliers.

NOTE

Ifyouwereabletoinstallthe“Y”connectordirectly

to the COLD water supply, please skip to step 8.

Ifthereisnotroomtoinstallthe“Y”connector2.

directly,threadtheshortextensionhoseonto

the COLD water supply and snug it by hand;

then tighten it another 2/3 turn with pliers.

Threadthe“Y”connectortotheshort3.

extensionhoseandsnugitbyhand;then

tighten it another 2/3 turn with pliers.

Connect the COLD inlet hose for the washer 4.

tothe“Y”connectorandsnugitbyhand;then

tighten it another 2/3 turn with pliers.

Connect the straight end of the long hose from 5.

thekittotheotheroutletonthe“Y”connector

and snug it by hand. Connect the hose’s 90°

coupling to the brass water inlet on the back

of the dryer and snug it by hand. Tighten each

connection of the dryer inlet hose another 2/3

turn with pliers.

Turn on the water and check for leaks at all 6.

connections.

1 ... 15 16 17 ... 26

No comments

Electrolux 137018200 A Use and Care Guide Page 16