Electrolux ERES3500 User Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 17
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
10
Electrolux 818 38 21-01/9
Service during operation
The water filter is replaced as follows:
Place a piece of kitchen tissue or a dishcloth in the
space under the filter. Remove the filter by turning it
clockwise. A small amount of water will run out.
Dry off and fit the new filter.
See the section "When starting the water system for
the first time".
The water connection does not need to be switched
off when changing the filter.
Replacement filters can be ordered from Electrolux
Service F orce Centre. See the section "Service and
replacement parts".
The gas cylinder is replaced as follows: remove the
gas cylinder and move over the adapter to the new
cylinder.
The replacement gas cylinder is obtained through
your local dealer.
Defrosting the fridge
The fridge is defrosted automatically every time the
compressor stops. Frost formation can be prevented
by:
· not putting warm foodstuff inside the cabinet.
· avoiding frequently opening the door or keeping
it open too long.
To change the light bulb
The light is switched on automatically when the
door is opened. Before replacing the light bulb,
disconnect the power plug from the outlet.
Cut the packaging around the bulb socket.
Keep the packaging on to hold the bulb when setting
it into the socket. Do not touch the bulb with your
bare fingers. Halogen light bulbs are sensitive to
grease from the skin.
Use a clear halogen light bulb.
Change of carbon filter
To maintain the best performance the carbon filter
should be changed once a year with normal usage.
New carbon filters can be purchased from your local
dealer. The filter is placed behind the grill and can be
reached by opening the cover. The cover can be
opened by simultaneously pressing the lever on the
right of grill (1) and turning the cover outward (2).
The carbon filter is then pulled out of its slot (3).
The new carbon filter i s placed in the existing slot -
The filter should be handled carefully so fragments
don't loosen from the surface.
When the appliance is not in use
Disconnect the appliance from electricity supply.
Empty all foods and clean the appliance, leaving the
doors ajar to prevent unpleasant smells.
If the cabinet will be kept on, ask somebody to
check it once i n a while to prevent the food inside
from spoiling in case of a power failure.
UV-blocked
Low pressure20W/12V
G4
1
2
3
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17

Comments to this Manuals

No comments