Electrolux ERES3500 User Manual download pdf (Page 16)

Electrolux 818 38 21-01/9

When the water system is started

for the first time.

The following should be carried out when the

refrigerator is correctly connected to the water

supply in the building:

Open the tap on the water connection and start up

the refrigerator. The water system main valve opens

and the system starts to fill up. Wait for five

minutes.

Unpack the filter provided and connect it as

follows:

- Remove the filter protective cap and insert the filter

connector into the filter seat and turn as shown in the

illustration (1) until the filter engages and the

projection on the filter cartridge is opposite the mark

on the plastic cover. See also the illustration and the

instructions on the inside of the service hatch.

- Unlock the water dispenser. See the section "The

water dispenser functions" Select carbonated water

and drain off about 1.5 litres (2.5 pints) of water.

There may be some air to start with.

Connect the gas cylinder provided as follows:

- Take out the gas cylinder from plastic bag and

screw the gas cylinder i nto t he adapter (3) for this

purpose, which is located in the valve, doing this by

hand without tools.

- Place the gas cylinder with adapter in the valve and

ensure that the valve bracket hooks are under the

counterhold on the adapter (5). Then turn up the

bracket lever (6) in one continuous movement. See

the illustration and the instructions on the inside of

the service hatch.

- Unlock the water dispenser and drain off a further

1.5 litres (2.5 pints) of water or until there are signs

that the carbonated water in the water dispenser is

startingtorun.

- The system is now ready for use. In order to obtain

the best possible performance from the refrigerator,

wait until the set temperature is reached. A low

temperature provides more carbon dioxide, a high

temperature less carbon dioxide.

Re-hanging the door.

It is not possible to re-hang the door. The water

supply goes through the hinge to the water dispenser.

Contact your dealer for more information.

Electrical connection

Connect the cabinet to a grounded electrical outlet.

Voltage: 230 V.

Fuse: 10 A.

Refer to the rating plate on the left inside the

cabinet.

1 2 ... 11 12 13 14 15 16 17

Comments to this Manuals

No comments

Electrolux ERES3500 User Manual Page 16

Comments to this Manuals

Related products and manuals for Fridges Electrolux ERES3500