Electrolux ERES3500 User Manual download pdf (Page 15)

Electrolux 818 38 21-01/9

Installing the cabinet

When two appliances are placed beside each other,

the distances enclosed in the plastic wrapping should

be glued between the appliances. As shown in the

illustration.

To obtain the best performance from the cabinet,

ensure :

· the cabinet is placed in a dry, cool place and

is not exposed to direct sunlight.

· the cabinet is not placed close to a source of

heat, e.g. a cooker or dishwasher.

· the cabinet is level. The cabinet should not lean

against any wall. If necessary adjust the

feet using the adjustment spanner supplied.

· there i s good air circulation around the cabinet

and that the air channels below and behind

the cabinet are not blocked. The ventilation

space above the cabinet must be at least 4 cm.

The ventilation space can either be

a) directly above the cabinet, or

b) behind and above the top cupboard. In this case,

the space behind the cupboard must be at least

50 mm deep.

Cabinet is placed at a location whose ambient

temperature corresponds to the climate

classification*, for which the appliance is designed.

* See on the rating plate on the inside of the

appliance.

The following table shows which ambient

temperature is correct for each climate classification.

Climate

classification

for an ambient temperature of

+10°C to +32°C

+16°C to +32°C

+18°C to +38°C

+18°C to +43°C

If the cabinet is placed in a corner and the side with

the hinges facing the wall, the distance between the

wall and the cabinet must be at least 230 mm to

allow the door to open enough so that the shelves

can be removed.

Check that the drain hose at the rear of the cabinet

discharges into the drip tray.

The power plug must be accessible after installation

of the cabinet.

50mm

)

1 2 ... 10 11 12 13 14 15 16 17

Comments to this Manuals

No comments

Electrolux ERES3500 User Manual Page 15

Comments to this Manuals

Related products and manuals for Fridges Electrolux ERES3500