8
17 18
5
9 10
19 2120
2422 23
25 26 27
28 29
Getting the best results
Hard oors and carpets: The Max In, Max In Turbo
and Max In motorised oor nozzles (5) detect the type
of surface being vacuumed. The nozzle with the pedal is
set to the type of surface to be vacuumed: Position 1 for
carpets (17) and position 2 for hard oors (18).
Crevices, corners, etc.: Use the crevice nozzle (8).
Upholstered furniture: Use the upholstery nozzle (9).
Curtains, lightweight fabrics, etc.: Use the upholstery
nozzle (9). The suction power can be reduced by pressing
the Max-Min button on the vacuum cleaner or the Min
button on the remote control.
Frames, bookshelves, etc.: Use the dusting brush (10).
Using Max In nozzles
Max In, Max In Turbo and Max In motorised oor nozzles,
are ideal for both hard oors and carpets. The Max In
motorized nozzle receives power via the tube and hose,
and no additional electrical connections are needed. A
blue light on the nozzle indicates that the brush roller is
turning. If anything should become lodged in the brush
roller, the light turns o.
Note: Do not use the Max In Turbo or Max In motorised
nozzles on fur rugs, rugs with long fringes or pile depths
exceeding 15 mm. To avoid damaging the carpet, do not let
the nozzle stay in one place when the brush is rotating. Do
not pass the nozzle over electrical cords, and be sure to switch
o the vacuum cleaner immediately after use.
English
Parking position
19 When you pause during cleaning, the tube can be
attached to the rear of the vacuum cleaner.
20 When storing, the vacuum cleaner can be placed
on end and the tube attached at the bottom of the
vacuum cleaner.
How to use the telescopic tube
21 Extend or shorten the telescopic tube by pushing the
release button towards the nozzle and simultaneously
adjusting the length of the telescopic tube. There is
a catch at both ends of the telescopic tube. Certain
models only have one release button.
Emptying the dust container
Electrolux Twinclean’s dust container must be emptied
when it is full to the Max sign. The dust container must
never be overlled.
22 Press the release button at the rear of vacuum cleaner.
23 Lift the dust container out.
24 Empty it over a wastepaper basket by pressing the
release button. Put the dust container back and press
the rear part of the container until it clicks into place.
Cleaning the dust lter
Electrolux Twinclean has a dust lter that should be
cleaned now and then to secure a constant high suction.
When it is time to clean the lter, the lter light on the
vacuum cleaner will ash. The lter is cleaned while in the
vacuum cleaner.
25 Turn o the vacuum cleaner when the lter light
ashes.
26 Open the cover by lifting the release catch.
27 Lift up the lter holder and turn it a half turn so that
the lters change places with each other and put the
lters back into the vacuum cleaner.
28 Turn the left lter a full turn in the direction of the
arrow. The lter light begins to ash and the vacuum
cleaner starts, and as you turn, the lter is cleaned.
After you have made a full turn, the vacuum cleaner
turns o and the lter light stops ashing. You can
now close the cover.
About once each year, when the lter light begins to ash
more frequently, the lters need to be washed.
A Lift out the lters according to the above.
B Remove one lter at a time from the lter container
(29) by pressing the marked release button and
turning the lter.
C Rinse the lters in lukewarm water and let them dry.
D Thread the lters back into the lter holder.
English
(20 pages)
(76 pages)
(10 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals