Electrolux EWF10751 User Manual download pdf (Page 29)

EN

installation electrolux 31

Installation

Unpacking

All transit bolts and packing must be

removed before using the appliance.

You are advised to keep all transit devices

so that they can be refitted if the machine

ever has to be transported again.

Using a spanner,

unscrew and

remove the two

rear bottom

screws.

5. With the machine laid on it’s back and

6.

7.

Positioning

1.

Slide out the

two plastic

pins.

2.

Lay the machine on its back ensuring

that the hoses

are not crushed.

Place one of the

polyethylene

angle packings

under the

machine.

Install the machine on a flat hard floor.

Make sure that air circulation around the

machine is not impeded by carpets,

rugs etc. Check that the machine does

not touch the wall or cupboard units.

Carefully level by

screwing the

adjustable feet in or

out.

Slide out the relevant pin. Cover all the

Set the machine upright and unscrew

the remaining rear screw.

open holes with

plugs which are

provided with the

Instruction

booklet.

3.

Remove the

polystyrene

block(s)

protecting the

motor

4.

place the bottom cover as marked in

position A, Then push the other end

of the cover as

directed to close

the buttom of

washing machine

(This is available

in selected

models only).

2.

1 ... 28 29 30 31 32

Comments to this Manuals

No comments