Electrolux END44501W User Manual Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 128
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
UK - 4 -
Installation and Switching On The Appliance
This appliance is connecting to 220-240V and 50 Hz.
Before making the connection to the power supply, ensure that the voltage on the
nameplate corresponds to the voltage of electrical system in your home.
If the socket does not match the refrigerator plug, replace the plug with a suitable
one (at least 16 A)
Insert the plug into a socket with an efficient ground connection. If the socket has no
ground contact, we suggest you call an electrician for assistance.
Manufacturer is not responsible for failure to complete the ground connection as
described in this booklet.
Do not place the appliance in direct sunlight.
Do not use in open air and shall not be exposed to the rain.
Place the refrigerator far from heat sources and in a
well-ventilated position. The refrigerator should be at least 50
cm from radiators, gas or coal stoves and 5 cm far from electrical
stoves.
Keep the top free for at least 15 cm.
Do not place heavy and lots of things on the appliance.
If the appliance is installed next to another refrigerator or freezer,
observe a minimum distance of 2 cm to prevent condensation.
Install the distance adjustment plastic (the part with black vanes
at the rear) by turning it 90° to prevent the condenser from
touching the wall.
The appliance must be stand firmly and level on the floor Use
the two front levelling-feet to compensate for an even floor.
In order to have air circulation under the appliance, the space
under the appliance must be open. Dont close it with carpet,
etc.
The outside of the appliance and the accessories inside should
be cleaned with a solution of water and liquid soap; the inside
of the appliance with sodium bicarbonate dissolved in lukewarm
water. After drying replace all the accessories.
Before Switching On
Wait after 3 hours before plugging the appliance in to the main power
to ensure proper performance.
There can be an odour when you first switch on the appliance. It will
disappear after the appliance starts to cool.
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page view 5
1 2 3 4 5 6 7 8 9 10 11 ... 127 128

Comments to this Manuals

No comments