Electrolux ERT1661AOX2 User Manual download pdf (Page 25)

Problem Possible cause Solution

The product temperature

is too high.

Let the product tempera-

ture decrease to room tem-

perature before storage.

Many products are stored

at the same time.

Store less products at the

same time.

The temperature in

the refrigerator is

too high.

There is no cold air circu-

lation in the appliance.

Make sure that there is cold

air circulation in the appli-

ance.

7.1 Replacing the lamp

1.

Disconnect the mains plug from the

mains socket.

2.

Remove the screw from the lamp

cover.

3.

Remove the lamp cover (refer to the

illustration).

4.

Replace the used lamp with a new

lamp of the same power and specifi-

cally designed for household applian-

ces. (the maximum power is shown

on the lamp cover).

5.

Install the lamp cover.

6.

Tighten the screw to the lamp cover.

7.

Connect the mains plug to the mains

socket.

8.

Open the door. Make sure that the

lamp comes on.

7.2 Closing the door

1.

Clean the door gaskets.

2.

If necessary, adjust the door. Refer to

"Installation".

3.

If necessary, replace the defective

door gaskets. Contact the Service

Center.

8. INSTALLATION

WARNING!

Read the "Safety Information"

carefully for your safety and cor-

rect operation of the appliance

before installing the appliance.

8.1 Positioning

This appliance should be installed in a dry,

well ventilated indoor where the ambient

temperature corresponds to the climate

class indicated on the rating plate of the

appliance:

Cli-

mate

class

Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

ENGLISH 25

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 63 64

Comments to this Manuals

No comments