Electrolux ERT17004W8 User Manual download pdf (Page 26)

26 electrolux

GB

GB

plate of cooling compartment and

freezes to it. If you remove the food right

at this moment the paper will tear and it

can cause clogging up in the outlet by

getting into it. So you are asked to be

careful - because of the above - when

placing foods wrapped in paper into the

appliance.

In case of increased demand e.g.

during heatwaves, the refrigerator

temporarily happens to operate

constantly - during this the automatic

defrosting is ineffective.

Remaining small ice and frost stains on

back plate of the cooling compartment

after defrosting period is not abnormal.

Regular cleaning

It is recommended to wash the inside of

the refrigerator in 3-4 weeks time.

Household cleaner or soap must not be

used.

After you made it no-current wash the

appliance using lukewarm water and

wipe it.

Clean the magnet door rubber profile

with clean water.

After cleaning plug the appliance to the

mains socket.

Dust and dirt collected on the back of the

refrigerator, condenser is recommended

to be removed and clean the evaporative

tray on top of the compressor once or

twice a year.

When the refrigerator is not in

use

In case the appliance will not be used for

a long time follow these steps:

Break the circuit of the appliance.

Remove foods from the refrigerator.

Trouble shooting

How to change the bulb

Should the light fail to work you can

change it as below:

Break the circuit of the appliance.

Unscrew the plate screw fixing the lamp

cover, then take the lamp cover off in the

direction of arrow and the bulb can be

changed. (Type of the bulb: Mignon 322,

230 V, 15 W, E 14 thread)

After changing bulb replace the lamp

cover, screw the plate screw and apply

voltage to the appliance.

The lack of light does not influence

operation of the refrigerator.

Defrost and clean it as written before.

Leave the door open to avoid a build up

of air inside.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Comments to this Manuals

No comments