Electrolux EUF3100 User Manual download pdf (Page 13)

Electrolux 818 22 59-00/3

Door Reversal

1. Close the cabinet and remove the plug from the

electrical socket.

2. Remove the ventilation grille. There is a part on

the grille that can be removed. Remove and

reposition it on the other side.

3. Put the cabinet on a wooden board when it is laid

down. Later, when raising the cabinet, it will be

easier to grip under the cabinet thanks to the board.

4. On the upper part of the cabinet. Put the hinge pin

on the other side.

5. On the lower part of the cabinet.

a. Unscrew the hinge.

b. Remove the door-closing fittings from the hinge

and put the hinge pin on the other side. Then attach

the supplied door-closing fitting.

6. a. Remove the door-closing fitting from the

bottom of the door.

b. Remove the plastic plug from the corresponding

hole on the other side. Use a screwdriver to rock the

plug loose. Then secure the supplied door-closing

fitting.

c. Secure the lower hinge.

Remove any play in the door by adjusting the height

of the lower hinge with the supplied spanner. S ecure

with the lock-nut.

7. Raise the cabinet and replace the ventilation grille.

8. To transfer the handle.

Unscrew the screws. Fit the handle onto the opposite

side by turning it one half circle. Press the supplied

plastic plugs into the holes to which the handle was

previously fitted.

9. Put the cabinet in position. Check that the

appliance i s level. See the section "Positioning the

cabinet".

Electrical connection

Connect the cabinet to a grounded electrical outlet.

Voltage: 230 V.

Fuse: 10 A.

Refer to the rating plate on the l eft inside the

cabinet.

1 2 ... 8 9 10 11 12 13 14

No comments

Electrolux EUF3100 User Manual Page 13