Electrolux IK22710LI B User Manual download pdf (Page 28)

Interior LED light

The interior light switches off auto-

matically after the door has been

opened for approx. 15 minutes.

If the interior light does not switch on

when the door is opened briefly, but

the temperature display is working,

the light may be defective.

The light intensity of the LED

light corresponds to laser class

1/1M.

Important

The light cover may only be removed by customer service

staff. If the cover is removed, do not look directly at the

light through optical lenses from close distance. This can

damage your eyes.

Repositioning the door racks

- Lift door rack vertically, lift out to

the front and re-insert at a different

height, following these steps in the

reverse order.

Equipment

You can re-arrange the storage

shelves as required.

Lift the glass shelf, align the recess

over the support and replace the shelf

in a higher or lower position.

The sectioned glass shelves

can be moved to make space for

tall containers. Place the shelf

rails provided, fig. 1, on the sup-

ports on the left and right at the

desired height.

Insert the glass shelves

1 and

2 as shown in fig. 2. The glass

shelf

2 with the raised edge

must go at the back.

If you need to make space for

tall containers, simply slide

the front half of the sectioned

glass shelf carefully under-

neath the back half, fig. 2.

g. 1 g. 2

Additional functions

In set-up mode you can set the child-proof lock and adjust the

brightness of the display.

Activating set-up mode:

• Press the

button 4 for approx. 5 seconds.

- The

button flashes.

- The display shows c for child-proof lock.

Note: The value to be altered flashes.

• Select the required function by pressing the

/ button:

c = child-proof lock,

h = display brightness

• Now select/acknowledge the function by pressing the

button

briefly:

> For c = child-proof lock,

press the

/ button to select

c1 = child-proof lock on or

c0 = child-proof lock off and acknowledge with the

button. When the symbol is lit, the child-proof

lock is activated.

> For h = brightness,

press the

/ button to select

h1 = minimum to h5 = maximum brightness and

acknowledge with the

button.

Exiting set-up mode:

• Exit the set-up mode by pressing the On/Off button

3; after

2 min. the electronic system switches over automatically. The

normal operating mode is activated again.

Switching the appliance on and off

You are recommended to clean the appliance before switching it

on for the first time (see „Cleaning“).

Switching on: Press the On / Off button so that the

temperature display lights up/flashes.

Switching off: Press the On / Off button for approx. two

seconds so that the temperature display goes out.

Setting the temperature

To increase the temperature

Press the

button.

To reduce the temperature

Press the

button.

- When pressing one of the buttons for the first time, the display

will start to flash.

- Pressing this button again enables you to change the temperature

setting.

- The electronic controls will switch over automatically about

5 seconds after the last time you pressed the button, and the

actual temperature will be displayed.

- You can change the temperatures in the refrigerator between

9°C and 2°C.

F 0 to F 5 appears in the display, the appliance has a fault.

Consult the customer service department.

Button

The button switches the refrigerator compartment to

maximum cooling. This is recommended particulary if

you wish to cool large quantities of fresh food as fast as

possible. The refrigeration temperature drops to the level

of the coldest temperature control setting.

Switching on: Press the

button briefly so that the LED comes on.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments

Electrolux IK22710LI B User Manual Page 28

Comments to this Manuals

Related products and manuals for Fridges Electrolux IK22710LI B