Electrolux EOC6P40X User Manual download pdf (Page 35)

Problem Possible cause Remedy

There is water inside the

oven.

There is too much water in

the tank.

Deactivate the oven and

wipe the water with a cloth

or sponge.

The indicator "Tank Full"

is off.

There is not enough water

in the tank.

Fill the tank with water until

the indicator comes on. If

water starts to come out in‐

side the oven, and the indi‐

cator is still off, contact a

qualified service engineer.

The indicator "Tank Empty"

is on.

There is no water in the

tank.

Fill the tank. If the indicator

is still on, contact a quali‐

fied service engineer.

The steam cooking does

not work.

Lime obstructs the hole. Check the steam inlet

opening. Remove the lime.

The steam cooking does

not work.

There is no water in the

tank.

Fill the water tank.

It takes more than three

minutes to empty the water

tank or the water leaks

from the steam inlet open‐

ing.

There are lime deposits in

the oven.

Clean the water tank. Re‐

fer to "Cleaning the water

tank".

The appliance is activated

and does not heat up. The

fan does not operate. The

display shows "Demo".

The demo mode is activa‐

ted.

1. Deactivate the oven.

2. Press and hold at the

same time

.

3. The first digit on the

display and Demo indi‐

cator start to blink.

4. Enter the code 2468 by

turning the knob for the

temperature right or left

to change the values

and press to con‐

firm.

5. The next digit starts to

blink.

6. Demo mode deacti‐

vates when you con‐

firm the last digit and

the code is correct.

The display shows "12.00". There was a power cut. Reset the clock.

ENGLISH 35

1 2 ... 30 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments