Electrolux ELITE 4230x/42 cc Service Manual download pdf (Page 48)

Electrics

45

Support Department; Tel: 01482 659309.

Clearing the System back to

Manufacturers Settings

If for any reason you wish to set the

IDM2000 back to its factory settings then the

following procedure should be used:

1. Press "F", keep finger on the "F" key until

5 bursts are heard from the keypad

buzzer. The IDM2000 has now reverted

to factory settings.

This can only be done when the system is

disarmed.

The Noise Pollution Act

If the alarm is activated continuously for 20

minutes, the system will shut down. This

effectively disarms the system. This is a

requirement of the Noise Pollution Act.

Plug-In-Systems reserve the right to change

product specification at any time without

prior notice.

SPECIFICATION

Mains Input 230 volts +/- 10% ~ ac

Frequency 50Hz

Output voltage 13.8 volts DC

Output current 12 amps (max)

Battery

recommended Re-chargeable lead-acid

12 volt battery, 6 cells,

leisure type, 44 ampere-

hours minimum

Dimensions

Height 193mm

Width 102mm

Depth 210mm (max)

Weight 2.28Kg

PRODUCT SUPPORT

Plug-In-Systems Ltd offer the customer an

On-Site Service, available for both Warranty

and Non-Warranty repairs (on the CEC and

Plug-In-Systems range of equipment only).

If you would like to take advantage of this

service then please ring Plug-In-Systems

(direct) on:

HULL (01482) 659309

and ask for PRODUCT SUPPORT

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 110 111

Comments to this Manuals

No comments