Electrolux ELITE 4230x/42 cc Service Manual download pdf (Page 49)

Note:

If using a combination relay, ensure the supply fuse is the correct amperage. A lower rating

will ‘blow’ causing `e, if switched on, to be connected directly to the caravan battery. While

towing, the caravan battery will be discharged instead of being charged.

WIRING OF 12S SOCKET TO TOWING VEHICLE

Electrics

12 VOLT ELECTRICAL SUPPLY

If your car is fitted with the appropriate relay,

please note the following points:

1. The caravan battery will be charged by the

car charging system independently of the

distribution panel.

2. If the caravan battery level is “low”, power

for the caravan 12 volt system can be

obtained from the car battery, by

connecting the 12S (grey) plug to the car,

and setting the distribution panel selector

switch to “car”. This will draw power from

the car battery and care should be taken

not to reduce the level of the car battery

so low that the car engine cannot be

started. (The battery level indicator in the

caravan distribution panel will show the

condition of the car battery in these

circumstances).

3. When the car and caravan are connected

through the 12N and 12S plugs and the

car engine is running, 12 volt power will

be supplied to the refrigerator, provided

the refrigerator selector switch is set to

the 12v position, regardless of the

position of the distribution panel selector

switch.

4. If an extension lead from the 12S socket

on a towing vehicle to the 7-core

connecting cable is used while a caravan

is parked on a caravan pitch, its length

should be kept to a minimum and not

exceed 5 metres. The minimum cross

sectional area of the supply and return

leads in the extension cable should be

2.5mm

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 110 111

No comments

Electrolux ELITE 4230x/42 cc Service Manual Page 49