Electrolux EWC1150 User Manual download pdf (Page 8)

Rinse hold

By selecting this option the water of the last

rinse is not emptied out to prevent the fab-

rics from creasing. When the programme

has finished, the lights "End" and "Door

locked" are lit to indicate that the water

must be emptied out (See: " At the end of

the programme").

No spin

By selecting this option all the spinning

phases are excluded. To be used for ex-

tremely delicate material. The machine will

add some additional rinses to the cotton

and synthetic programmes.

For the maximum spin speed allowed by

each programme, refer to the chapter

Washing programmes.

Select the Delay Start by pressing

button 2

Before you start the programme, if you wish

to delay the start, press the button 2 re-

peatedly, to select the desired delay. The

corresponding pilot light will light up.

You must select this option after you have

set the programme and before you press

button 6.

You can cancel or modify the delay time at

any moment, before you press button 6.

Cancelling the delayed start after having

pressed button 6:

1. Set the washing machine to PAUSE by

pressing button 6.

2. Press the button 2 once, the light rele-

vant to the selected delay goes off.

3. Press button 6 again to start the pro-

gramme.

Important! The selected delay can be

changed only after selecting the washing

programme again.

The door will be locked throughout the de-

lay time (door locked light lit).

The Delay Start can not be selected with

DRAIN or SPIN programme.

Select the desired option by means of

buttons 3, 4 and 5

Depending on the programme, different

functions can be combined. These must be

selected after choosing the desired pro-

gramme and before pressing the button

6.The relevant light will illuminate.

If an incorrect option is selected, the corre-

sponding indicator lamp flashes for about 2

seconds. For the compatibility of the op-

tions with the washing programmes, refer

to the chapter «Washing programmes».

Start the programme by pressing

button 6

To start the selected programme, press this

button; the corresponding pilot light stops

flashing and remains lit.

On programme progress display the pilot

lights A and E illuminate to indicate that the

appliance starts operating and the door is

locked.

Altering an option or a running

programme

It is possible to change any option before

the programme carries it out.

Before you make any change, you must

pause the washing machine by pressing the

button 6.

The programme can be changed as long as

the button 6 has not been pressed. Chang-

ing a running programme is possible only

by resetting it. Turn the programme selector

dial to

and then to the new programme

position. Start the new programme by

pressing the button 6 again.

Interrupting a programme

Press the button 6 to interrupt a pro-

gramme which is running, the correspond-

ing light starts to flash. Press the button

again to restart the programme.

8 electrolux

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 47 48

Comments to this Manuals

No comments