Electrolux EDC510E User Manual download pdf (Page 14)

Something not working?

If, after the above checks, there is still a fault, call

your local Electrolux Customer Service on

131349.

Before contacting your local Service Centre, please make the following checks:

Important!

If during the drying phase the END pilot light starts blinking and the buzzer sounds, please switch your tumble

dryer off and contact your local Service Centre.

Problem Possible cause

• The dryer does not work:

• The door(s) is(are) open.

• The plug is not fitted into the wall socket.

• There is no electricity supply from the wall socket.

• The selector dial is not set correctly.

• The water reservoir is full or not correctly inserted

(FULL TANK pilot light is on). The programme

starts in any case but it stops after approx. 4

minutes.

• The START/PAUSE button has not been

depressed.

• The dryer does not dry properly:

• The filters are clogged.

• Drum needs cleaning, refer to page 13.

• The condenser is clogged.

• The water reservoir is full.

• The selected cycle is not suitable for the laundry.

• Insufficient drying time.

• The laundry has not been spun properly.

• The low temperature function has been selected.

• Excessive laundry load.

• The dryer is not correctly installed.

Please make sure you give the model and serial

number of the appliance.

This information can be found on the rating plate

(see picture of page 5).

125992513.qxd 29/07/2004 14:02 Pagina 14 (Nero/Process Black pellicola)

1 ... 13 14 15 16

No comments

Electrolux EDC510E User Manual Page 14