Electrolux EWW14113 User Manual download pdf (Page 17)

17

ENGLISH

Close the door.

6.

Make sure that no laundry

remains between the seal and

the door.

BEFORE FIRST USE4.

Ensure that the electrical and water

connections comply with the

installation instructions.

Put 2 litres of water in the detergent

compartment for washing phase. This

activates the drain system.

1.

2.

3.

Select a Cottons cycle at 90 °C,

without any laundry in the machine, to

remove any manufacturing residue

from the drum and tub then start the

machine.

DAILY USE - WASHING (Only)5.

Press the On/Off button to turn on the

washer-dryer. Touch one of the

Program Icons to choose the wash

program you require.

For correct operation of the load

sensor, activate the appliance and

set a wash program BEFORE

loading the laundry in the drum.

(see page 9)

Check and remove objects (if there

are any) that could be trapped in the

fold.

1.

2.

5.1 Loading The Laundry

Connect the main plug to the main

socket.

Turn the water tap on.

3.

Place the laundry in the drum, one

item at a time, shaking them out as

much as possible. (Refer to page 23

“WASHING & DRYING HINTS”)

5.

4.

During installation or before first use you

may observe some water in the machine.

This is a residual water left in the machine

after a full functional test in the factory to

ensure the machine is delivered to

customers in perfect working order and is

no cause for concern.

NOTE

1 ... 16 17 18 ... 40

Comments to this Manuals

No comments