Electrolux ER9013B User Manual download pdf (Page 13)

Electrolux 818 16 05-02/6

Too much frost and ice are produced. Make sure that the door is completely closed and t hat the

insulating strip is complete and clean.

Set a warmer temperature.

The compressor operates continuously. Set a warmer temperature.

Make sure that the door is completely closed and t hat the

insulating strip is complete and clean.

The temperature where the cabinet is placed is above normal

room temperature.

The cabinet does not operate at all.

Cooling or interior light does not

operate. No indicator lamps light.

The power plug is not properly connected.

The fuse has blown.

The cabinet is not switched on.

Power does not reach the cabinet. (Try connecting another

electrical device to the power outlet.)

Power failure Do not unnecessarily open the cabinet, except when the power

cut seems to be long, in which case the food products should be

moved to another cabinet that works. If the frozen products are

still hard following the power cut, they may be immediatel y

refrozen. If the food products have thawed but are still fresh,

they may be used, however they should be prepared before

re-freezing or eating them.

Sound level in cabinet is too high. The refrigerating system will always produce some sounds. A

pulsing sound is heard when coolant is pumped inside the

cooling pipes. A ticking sound from the thermostat can be

heard when the compressor switches on and off. The s ound

level varies depending on the operation of the cabinet.

If you feel the sound level is incorrect:

Make sure the pipes at the back of the cabinet not touch each

other. Carefully bend them if they do.

If the cushion spacers (between the cabinet wall and pipes)

come loose, put them back in place again.

Carefully follow the instructions in the chapter "Installing the

cabinet".

Guarantee Conditions

See Guarantee Conditions on the Registration Card.

ServiceandSpareParts

In the event of your appliance requiring service, or

if oyu wish to purchase spare parts please contact

your local Electrolux Service Force Centre by

telephoning:

XXXXXXXXXXX

Your call be routed the Service Force Centre

covering your post code area. The address of your

local Service Force Centre ids detailed in the

accompanying Customer Care Book.

Before calling out an engineer, please ensure you

have read the details under the heading "Something

Not Working"

When you contact the Service Centre you will need

to give the following details.They will be found

inside your appliance.

MOD (modell):.....................................................

PROD.NO (model number):..................................

SER:NO (serial number):.......................................

Purchase date............................................................

Customer Care Department

For general enquiries concerning your Electrolux

appliance or futher information on Electrolux

products, you are invited t o contact our Customer

Care Department by letter or phone as follows:

Customer Care Department

Electrolux

55-77 High Street

Slough

Berkshire

SL1 1DZ

Phone: 08705 950950 *

* calls to this number may be recorded for training

purposes

1 2 ... 8 9 10 11 12 13 14 15 16 17

Comments to this Manuals

No comments

Electrolux ER9013B User Manual Page 13

Comments to this Manuals

Related products and manuals for Fridges Electrolux ER9013B