Electrolux ERZ3100 User Manual download pdf (Page 13)

Electrolux 818 35 36-01/3

It is too warm inside the refrigerator. Set a lower temperature.

Put food products in the right place inside the refrigerator. See

the chapter "Temperature inside the refrigerator".

Distribute the food products to allow cold air to circulate

around them.

Make sure that the door is completely closed and that the

insulating strip is complete and clean.

It is too cold inside the refrigerator. Set a warmer temperature.

It is for cold in the "Natura-fresh" zone. Push the "-" and the "reset+" buttons simultaneously about 5

seconds.

Water comes out on the floor. Place the drain hose at the back of the cabinet above the drain

bowl. See the chapter "Before using t he cabinet the first time".

It is too warm inside the freezer. Set a lower temperature.

Make sure that the door is completely closed and that the

insulating strip is complete and clean.

If warm food products have been put inside the freezer, wait for

a couple of hours and then check the temperature again.

Distribute the food products to allow cold air to circulate

around them.

It is too cold inside the freezer. Set a warmer temperature.

Action Freeze could have been switched on.

The temperature display shows the highest temperature inside

the cabinet. Thus a difference between the temperature

indicated on the display and the (average) temperature

measured in another way is normal.

Too much frost and ice are produced. Make sure that the door is completely closed and that the

insulating strip is complete and clean.

The compressor operates continuously. Set a warmer temperature.

Make sure that the door is completely closed and that the

insulating strip is complete and clean.

The cabinet does not operate at all.

Cooling or interior light does not

operate. No indicator lamps light.

The cabinet is not switched on.

Power does not reach the cabinet. (Try connecting another

electrical device to the power outlet.)

The power plug is not properly connected.

The fuse has blown.

Sound level in cabinet is too high. The refrigerating system will always produce some sounds. A

pulsing sound is heard when coolant is pumped inside the

cooling pipes. A ticking sound from the thermostat can be

heard when the compressor switches on and off. The sound

level varies depending on the operation of the cabinet.

If you feel the sound level is incorrect:

Make sure the pipes at the back of the cabinet not touch each

other. Carefully bend them if they do.

If the cushion spacers (between the cabinet wall and pipes)

come loose, put them back in place again.

Carefully follow the instructions in the chapter "Installing the

cabinet".

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

Comments to this Manuals

No comments

Electrolux ERZ3100 User Manual Page 13

Comments to this Manuals

Related products and manuals for Fridges Electrolux ERZ3100