Electrolux ERZ3100 User Manual download pdf (Page 17)

Electrolux 818 35 36-01/3

Door Reversal

1. Close the cabinet and remove the plug from the

electrical socket.

2. Remove the ventilation grille. There is a part on

the grille that can be removed. Remove and

reposition it on the other side.

3. Put the cabinet on a wooden board when it is laid

down. Later, when raising the cabinet, it will be

easier to grip under t he cabinet thanks to the board.

4. Unscrew the lower hinge and remove the lower

door. Unscrew the upper hinge pin and remove the

upper door.

5. On the centre beam:

Remove the plastic plugs by driving a drift into them

and rocking them loose.

Move the centre hinge unit to t he other side. Flatten

the threads in the holes remaining from the hinges

and insert new plastic plugs.

6. On the doors: Change the positions of the door

fittings. Put a new plug in the hole on the lower

door.

7. Replace the upper door and secure the upper hinge

pin.

Replace the lower door. Change the position of the

hinge pin of the lower hinge. Then secure the hinge.

8. Raise the cabinet and replace the ventilation grille.

9. To transfer the handle.

Unscrew the screws. Fit the handle onto the opposite

side by turning it one half circle. Press the supplied

plastic plugs into the holes to which the handle was

previously fitted.

10. Put the cabinet in position. Check that the

appliance is level. See the section "Positioning the

cabinet".

Electrical connection

Connect the cabinet to a grounded electrical outlet.

Voltage: 230 V.

Fuse: 10 A.

Refer to the rating plate on the left inside the

cabinet.

1 2 ... 12 13 14 15 16 17 18

No comments

Electrolux ERZ3100 User Manual Page 17