Electrolux IK3025SR User Manual download pdf (Page 66)

Problem Possible cause Solution

The compressor

does not start im-

mediately after

pressing the Action

Freeze or Shopping

function, or after

changing the tem-

perature.

This is normal, no error

has occurred.

The compressor starts after

a period of time.

Water flows on the

rear plate of the re-

frigerator.

During the automatic de-

frosting process, frost de-

frosts on the rear plate.

This is correct.

Water flows into the

refrigerator.

The water outlet is clog-

ged.

Clean the water outlet.

Products prevent that wa-

ter flows into the water

collector.

Make sure that products do

not touch the rear plate.

Temperature cannot

be set .

Action Freeze or Shopping

functions switched on.

Switch off Action Freeze or

Shopping manually, or wait

to set the temperature until

the function has reset auto-

matically. Refer to "Action

Freeze or Shopping func-

tion ".

The temperature in

the appliance is too

low/high.

The temperature regulator

is not set correctly.

Set a higher/lower tempera-

ture.

The door is not closed

correctly.

Refer to "Closing the door".

The product temperature

is too high.

Let the product tempera-

ture decrease to room tem-

perature before storage.

Many products are stored

at the same time.

Store less products at the

same time.

The temperature in

the refrigerator is

too high.

There is no cold air circu-

lation in the appliance.

Make sure that there is cold

air circulation in the appli-

ance.

The temperature in

the freezer is too

high.

Products are too near to

each other.

Store products so that

there is cold air circulation.

There is too much

frost.

Food is not wrapped cor-

rectly.

Wrap the food correctly.

The door is not closed

correctly.

Refer to "Closing the door".

The temperature regulator

is not set correctly.

Set a higher temperature.

66

www.electrolux.com

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 72

Comments to this Manuals

No comments