Electrolux ERES38820X User Manual download pdf (Page 15)

50mm

Electrical connection

Before plugging in, ensure that the voltage

and frequency shown on the rating plate

correspond to your domestic power supply.

The appliance must be earthed. The power

supply cable plug is provided with a contact

for this purpose. If the domestic power sup-

ply socket is not earthed, connect the appli-

ance to a separate earth in compliance with

current regulations, consulting a qualified

electrician.

The manufacturer declines all responsibility

if the above safety precautions are not ob-

served.

This appliance complies with the E.E.C. Di-

rectives.

Removing the transport support

Your appliance is equipped with transport

support to secure the door during transpor-

tation.

To remove them do these steps:

1. Open the door.

2. Remove the transport support from the

door sides.

3. Remove the transport support from the

lower hinge (some models).

Important! Some models are fitted with a

silencing pad under the cabinet. Do not

remove this pad.

3

2

Rear spacers

Install the spacers provided within the ac-

cessory bag as shown in the figure.

Install two spacers on the back side of the

panel and two spacers with adhesive on

the lower part.

Connecting the water hose.

Water supply should be provided with a tap

and 3/4" male connector within 1,5 m from

the appliance.

This work is to be carried out by a skilled

plumber.

There are different type-approved taps and

tap assemblies on the market.

The water hose must not be cracked,

squeezed or put in tight bends.

Before the appliance is placed its final loca-

tion, ensure that the water connection has

electrolux 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 71 72

Comments to this Manuals

No comments