Electrolux EVYP9841AX User Manual download pdf (Page 39)

12.4 Decalcification of the

Steam generator

1.

Put 250 ml of water mixed with 3 ta-

blespoons of vinegar directly into the

steam generator.

2.

Activate the Decalcification function in

the Assisted Cleaning menu. The dis-

play will show the duration of the

function.

3.

An acoustic signal sounds when the

programme is completed. Touch the

sensor field to deactivate the signal.

4.

Remove the remaining water from the

steam generator.

5.

Keep the door open for approximately

1 hour to let the appliance dry fully.

12.5 Lamp

WARNING!

There is a risk of electrical shock.

The lamp and the lamp glass cov-

er can be hot.

Before you change the lamp:

• Deactivate the appliance.

• Remove the fuses from the fuse box or

deactivate the circuit breaker.

CAUTION!

Put a cloth on the bottom of the

interior of the appliance. It pre-

vents damage to the lamp glass

cover and the cavity.

Always use the same lamp type.

Replacing the lamp at the cavity

ceiling:

1.

Turn the lamp glass cover counter-

clockwise to remove it.

2.

Remove the metal ring and clean the

glass cover.

3.

Replace the lamp with a suitable 300

°C heat-resistant lamp.

4.

Attach the metal ring to the glass cov-

er.

5.

Install the glass cover.

Replacing the lamp on the left side of

the cavity:

1.

Remove the left shelf support.

2.

Use a Torx 20 screwdriver to remove

the cover.

3.

Remove and clean the metal frame

and the seal.

4.

Replace the lamp with a suitable 300

°C heat-resistant lamp.

5.

Install the metal frame and the seal.

Tighten the screws.

6.

Install the left shelf support.

12.6 Cleaning the door

To clean the door remove it.

A

A

CAUTION!

Be careful when you remove the

door from the appliance. The door

is heavy. There is a risk of injury or

damage to the appliance.

Removing the door

1.

Open the door as far as it goes.

2.

Fully press the clamping levers (A) on

the two door hinges.

ENGLISH 39

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 47 48

Comments to this Manuals

No comments